Making Metal Full Size Bed

Author: calvin | Categories: Bed Frame comments
Green Metal Full Size Bed

Metal full size bed that can be sold in each city, as well as patterns for the do-it-yourself bunk bed kit. But the vast majority of bunk beds are for twin-size mattresses. If your child wants or needs a larger bed, put together a bed full size bunk bed is a pretty simple DIY project. While it is possible to just change the dimensions of a double-size kit, you may need to make some adjustments to accommodate extra weight.

Instructions

Mount a square with two 75-inch beams and two 35-inch beams. Attach them to stand on the edge, with two screws at each attachment point of metal full size bed. Drive the screws through the plate of the short beams, at the ends of the long beams. Place the screws 1/2 inch from the top and bottom of the beams. Drill two holes in each corner, using a drill diameter your bolts. Place the first whole one inch from the inner edge of the long beam, one inch from the top of the short beam. Place the second whole 4/3 inch below the first hole. All holes should be drilled in the short beams. Lay a plywood sheet flat on top of the square, aligned at the edges.

Secure the plywood sheet with two screws along each short side and three along each long side. Space the screws evenly.  Drill two vertical holes in one of the 6 inch x 6 inch inserts, using a drill diameter your bolts. The top hole should be one foot from the end of the insert of metal full size bed, the lower hole 3/4 in under it. Both holes should be 2 3/4 inches from the outer edge of the insert. Repeat step 5 for both ends of all four services, for a total of 16 holes.

Comments are closed.