Limbert furniture can be transformed with a variety of painting techniques. Wooden furniture painting is useful to bring a new life into old and tired pieces, or to brighten the boring bits that you do not like. You can also buy new furniture without finishing in stores and paint as you like. Take your time and do not skip steps when painting furniture; The extra time it takes to do well is insignificant compared to the time you will live with the result.
24 Photos Gallery of: Technique of Paint Limbert Furniture
Sanding is particularly important for older pieces of furniture that have old finishes on them. Since you are painting, it is not critical to remove every last bit of old finish, but it is necessary to create a surface to which the paint adheres. Using an orbital sander or vibration and 80 grit sandpaper, review all large surfaces, which are easily accessible with a power tool. Remove all loose flakes, peeling paint, and as much material as possible. For very stubborn finishes, it is enough to scrape the surface and remove the gloss so that the primer will adhere. Finish sanding corners and hard to reach places with a sanding block or just a piece of sandpaper.
Wipe all surfaces with a lightly dampened cloth before priming, then vacuum them. Apply the background as thin as possible. Primer is not designed for full coverage; If it looks milky or thin, that’s fine. The purpose of priming is to help the finishing layer adhere to the wood, so as not to cover the wood itself.
Allow the primer to dry until it is not sticky to the touch. This will not take long, probably less than an hour. Apply the finishing coat thicker than the primer, but still in very thin layers. And then, brush in the same instruction as the grain of the wood. Start with the most difficult places to reach, and finish with the most visible and widest surfaces. Be careful not to cause any significant paint buildup on the sides of the drawers or it may cause them to come together. There are many types of paint that can be used in furniture. For ease of use and availability, a simple latex paint works well. Milk paint is a more traditional material that gives a traditional Shaker look. Oil paint can be used for surfaces and parts that are heavily used or exposed to the elements.